Keep your dirt bike in great shape for longer by performing a bit of maintenance on it after every day of riding. Not sure what maintenance is necessary? These tips can help.

How to Take Care of Your Dirt Bike

Dirt bikes aren't cheap, so keeping yours in the best shape possible should be one of your priorities. If you're not sure where to start when it comes to maintenance tasks, Advanced Filtration Technologies, Inc. has your back. Check out these basic dirt bike maintenance tips.

Wash ; Dry Your Dirt Bike

It's not uncommon for a dirt bike to end up covered in dirt, mud, and other debris after a day on the track or trail. In fact, you can expect your bike to end up like this after a day of riding every time. This, however, doesn't mean you should leave your bike in this condition until your next ride. Since dirt and mud can be quite corrosive, it's important to take the time to wash your bike. This is probably the last thing you wan to do, but it's definitely worth your time. While you can use a power washer to clean off your bike, you're better off using a simple bucket of water and some brushes. Since a power washer can result in water getting into parts where it shouldn't be, be extra careful if you choose to use this method. Once your bike is nice and clean, be sure to dry it off instead of allowing it to air dry. This will help ensure water stains don't ruin all of your hard work.

Synthetic Oil for Your Dirt Bike

Your dirt bike's maintenance won't just focus on your bike's exterior. There is also work to be done on the interior parts of your ride. To start, your bike will need oil changes at regular intervals in order to keep your engine running strong. If you're a car owner, you're probably used to giving your car oil changes. The concept is the same, but there will be some differences when it comes to an oil change for a dirt bike. To start, how often your bike will need an oil change will be based on riding hours in most cases. The type of oil you will need will also have to be specifically made for dirt bike engines. One thing that won't change, however, is the importance of using a synthetic oil for your oil changes. When your dirt bike is ready for an oil change, be sure to make it a synthetic oil change in Williston. Using a quality oil like AMSOIL's  10W-40 Synthetic Dirt Bike Oil is your best option since it can keep your engine better protected than a conventional oil. You can find even more great AMSOIL Oil products like this by contacting Advanced Filtration Technologies, Inc at (701) 572- 3780.

Perform Maintenance on Your Dirt Bike's Tires

While you're out riding, your tires and wheels are what absorb most of the impact your bike makes on the track. Because of this, these parts take quite a beating and will need to be checked on and serviced after riding. Start by checking the spokes in the wheels. These can come loose as a result of the impact, and it's super important that you tighten them before putting your bike to use again. Failing to do this can cause your wheels to misalign which can lead to a whole lot of other problems. Once your spokes are nice and tight, grab a tire pressure gauge to check on your tires' current pressure. Adjust your pressure until both of your tires are back to the recommended level.

Tighten Loose Nuts ; Bolts

The impact your bike takes on not only causes the spokes in your wheels to come loose. It can also cause other small parts of your dirt bike to loosen up. Before storing your bike after a ride, take a bit of time to inspect the different nuts, bolts, and cables that may have also loosened up while you were out on the track. While this may seem like a small and unimportant task, it's actually super important. Riding around with loose parts can cause them to get even more loose, which can lead to further issues.

Keep Your Dirt Bike Strong With a Synthetic Oil Change in Williston, ND

A synthetic oil change in Williston, ND can help your dirt bike stay in great shape for a long time. If you need help finding the perfect synthetic oil for your dirt bike, car, motorcycle, or any other engine, contact Advanced Filtration Technologies, Inc. at (701) 572- 3780 for the personalized service you need.